flushfix banner ad 1140x150
flushfix banner ad mobile 756x345


Australian made galvabond timber connectors idea for connecting timbers at 90 degrees to each other


Joining timber at right angles

For tie down to double top plates


Install the Unities as shown to achieve twice the load in the Limit State Design Load table.

Nailing into both sides of a single 35mm truss is not recommended as it may cause the timber to split.

Product Specification

Product Code

Left Hand - 1mm - Galvanised BUNITL
Right Hand - 1mm - Galvanised BUNITR

Material Specification

Thickness: 1.0mm
Material: G300-Z275


BN 30 x 2.8mm Galvanised Timber Connector nails:  

Log in to view design loads