flushfix banner ad 1140x150
flushfix banner ad mobile 756x345

Hoop Iron

Various solutions for Type A and Type B bracing and general strapping requirements made from galvabond material


Applications

Two individually cut pieces of Hoop Iron Bracing are required to brace a timber framed wall section. These pieces should overlap to form an ‘X’.

  1. Secure first end of one piece of bracing into position using 30 x 2.8mm Dunnings’ nails.
  2. Stretch the Hoop Iron Bracing over the entire panel to be braced, ensuring the brace is taut.
  1. Secure the second end while maintaining tension on the brace.
  2. Repeat this procedure for the second piece of Hoop Iron Bracing, ensuring an ‘X’ is formed.
  3. Secure the Hoop Iron Tensioner in each length of Hoop Iron Bracing to remove any remaining slack.

Short Wall Bracing

A. Wrap ends of Hoop Iron Bracing around plate and fix with nails (Refer Detail B)

B. Attach minimum 1.0 x 30mm Hoop Iron Bracing with 2/30 x 2.8mm BN Dunnings’ nails into each stud

C. Hoop Iron Tensioner

D. Minimum 70 x 35-F5 Wall Stud

E. Stud Ties or 1/T-Plate (both sides of frame)

F. Tie-down as per AS1684/ minimum M10 Chemset

 


Wall Heights up to 2.7m

Bracing Capacity (kN) for Unit Width (mm)
Panel Type60090010001100120013001400150016001700
Short Wall Bracing 1.5 2.2 2.7 3.0 3.3 3.6 3.8 4.0 4.1 4.2

 


Product Specification

Product Code

1.0mm Structural Hoop Iron – G300 – Z275 – Punched
1.0 x 30mm Perforated Galvanised - 6m Roll D327
1.0 x 30mm Perforated Galvanised - 10m Roll BHI10HPH
1.0 x 30mm Perforated Galvanised - 15m Roll BHI15HPH
1.0 x 30mm Perforated Galvanised - 20m Roll BHI20HPH
1.0 x 30mm Perforated Galvanised - 30m Roll BHI30HPH
1.0 x 30mm Perforated Galvanised - 50m Roll BHI50HPH
0.8mm Structural Hoop Iron – G300 – Z275 - Punched
0.8 x 30mm Perforated Galvanised - 6m Roll D325
0.8 x 30mm Perforated Galvanised - 10m Roll BHI10HP
0.8 x 30mm Perforated Galvanised - 15m Roll BHI15HP
0.8 x 30mm Perforated Galvanised - 20m Roll BHI20HP
0.8 x 30mm Perforated Galvanised - 30m Roll BHI30HP
0.8 x 30mm Perforated Galvanised - 30m Roll (Boxed) BHI30HPB
0.8 x 30mm Perforated Galvanised - 50m Roll BHI50HP
0.8mm Hoop Iron – G300 – Z275 – Unpunched
0.8 x 30mm Plain Unpunched Galvanised - 6m Roll D322
0.8 x 30mm Plain Unpunched Galvanised - 5kg Roll BHI5H
0.6mm Strapping Iron – Z275 – Punched
0.6 x 25mm Perforated Galvanised - 6m Roll D326
0.6 x 25mm Perforated Galvanised - 15m Roll BHI25615
0.6 x 25mm Perforated Galvanised - 30m Roll BHI25630

Material Specification

 
Thickness: 0.8mm/1.0mm
Material: G300-Z275

 


Product Specification

Product Code

Heavy Duty Tensioner Witd T Nuts and Bolts - Galvanised - 100ea Per Carton BHIT
Hoop Iron Tensioner With Hex Head - Galvanised - 100ea Per Carton BHITHH

 

Log in to view design loads

Dunnings-Logo-WHITE