Unities
Australian made high corrosion resistant stainless steel timber connectors idea for connecting timbers at 90 degrees to each other
Joining timber at right angles
Purlin
For tie down to double top plates
Install the Unities as shown to achieve twice the load in the Limit State Design Load table.
Nailing into both sides of a single 35mm truss is not recommended as it may cause the timber to split.
Product Specification | Product Code |
Left Hand - nom 1mm | SBUNITL |
Right Hand - nom 1mm | SBUNITR |
Thickness: |
0.9mm |
Material: |
Minimum Grade 316 Stainless Steel |
SBN 30 x 2.8mm Stainless Timber Connector nails